To keep your bike chain in perfect condition during wet weather, you should apply a chain wax after every ride and once you have cleaned your chain. This will reduce wear and tear, maintain the performance of your chain and help it last longer, saving you money on replacement parts.
WD-40 Specialist Motorbike Chain Wax has strong adhesive properties, this makes it perfect for high speed, high stress applications typically associated with motorcycle chains. It is ideal for wet conditions, as the formula thickens and dries, creating a highly water resistant coating to actively prevent rust and corrosion.
Step 1: Make sure you have cleaned your chain first with WD-40 Specialist Motorbike Chain Cleaner.
Step 2: Place the motorbike on a suitable stand so that the rear wheel is free to turn! grab your can of Chain Wax!
Step 3: Spray on to the chain and directly on to the sprockets! Do this whilst turning the rear wheel slowly in a clockwise direction.
NOTE: It’s precise spray application minimises any wastage making it easier to apply anywhere you want it.
Step 4: For best results, leave for 10 minutes to ensure the chain links receive deep lubrication! This allows for greater Penetration rather than surface lubrication, this is caused by spraying on top of the chain.
Still unsure? Watch the full video here and you will maintain your bike performance for longer!
Click here If you want to find out more about the WD-40 Specialist Motorbike Range.
If you want to stock up on or try WD-40 Specialist Motorbike Chain Wax for yourself – Click here to head to Amazon!
The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.
© 2019 WD-40 Company