Because it is an aerosol spray. When sprayed, the product forms a fine mist that can ignite easily if it comes into contact with a flame or spark. Tests show that: The spray can ignite from a long distance. It contains enough energy to burn quickly once ignited for safety reasons, regulations require products with these properties to be labelled as “extremely flammable aerosols”, even if the liquid itself is not highly flammable when not sprayed. That’s why it must be kept away from heat, sparks, and open flames.

Is it suitable for electrical components?

Yes — but only when the power is turned off. The product does not conduct electricity and can safely be used around electrical components once they are disconnected from power. For safety reasons, never spray it on live or powered?on electrical equipment.

Is it safe on plastic, rubber?

The product is safe to use on most plastics and rubber materials. Some sensitive plastics, such as polycarbonate or polystyrene, may react if the product is left on the surface for a long time. Certain rubbers may also swell with prolonged contact. To be safe, we recommend testing the product on a small area first and avoiding extended contact on sensitive materials.

Is it safe to use indoor?

Yes, the product can be used indoors. It carries the EU Ecolabel, which means it meets strict environmental criteria and contains only limited amounts of hazardous substances. When using it indoors, make sure the area is well ventilated and keep it away from open flames, as the aerosol is flammable.

What is “bio”? What does 85% bio based mean? What’s it made of?

When we say “bio”, we don’t mean organic farming. In this case, “bio” means bio-based. That means the product is made mostly from renewable natural sources, like plants or other natural materials, instead of being made entirely from fossil fuels like oil. If a product is 85% bio-based, it means that most of the material comes from renewable sources, with a small part still coming from conventional materials. This definition follows official EU rules used for eco-labelled products.

Does "bio-based“ mean that the formula is biodegradable?

Does bio-based mean biodegradable? Not always — but for this product, yes. More than 95% of its ingredients break down quickly in the environment. It is EU Ecolabel certified, which means it meets very strict environmental standards. So while “bio-based” alone doesn’t always mean biodegradable, this product is designed to be both — renewable and environmentally responsible.

Is this product food grade approved? What NSF Registration does it have?

No.This product is not intended for use where it could come into contact with food. It is registered as NSF H2, which means it can be used in industrial or food-processing environments, but only in areas where food contact cannot occur.If a product is needed for situations where food contact is possible, a different type of lubricant (NSF H1) would be required.

Is it non-conductive?

Yes. The product is non-conductive, which means it does not conduct electricity. It has insulating properties and has been tested to safely withstand high electrical voltage. This makes it suitable for use in applications where electrical safety is important.

Can I use it in high-temperature applications like engines?

No. This product is not made for engines or very high-temperature parts. It’s intended for general maintenance and everyday lubrication, not for engine internals or parts that get extremely hot. Using it in engines could reduce performance or cause damage. For engines, always use a lubricant specifically designed and approved for high temperatures.

What’s Ecolabel? What's so special?

The EU Ecolabel is an official European label that helps people identify products that are better for the environment. It means that: The product has been checked by independent experts It meets strict environmental standards Its impact is considered across its whole life cycle, from materials to disposal

Is the product recyclable?

Please avoid releasing any unused product into the environment. Both product residues and the empty container should be disposed of at appropriate collection points in accordance with local recycling and waste?disposal guidelines.

On what materials is this product not compatible with?

WD-40 SPECIALIST® Bio Lubricant Multi-Use can be used on metal surfaces and is generally compatible with most plastics and rubbers. Because materials and surfaces can differ, we recommend testing the product on a small area first before applying it more widely.

Can I use it on garden tools and outdoor furniture?

Yes, it can be used on garden tools and outdoor furniture.The product helps protect against rust and corrosion and is biodegradable. It also carries the EU Ecolabel, which means it meets strict environmental standards. Simply wipe off any excess product after use to keep surfaces clean and prevent dirt build-up.

When should I use a white lithium grease?

WD-40 Specialist® White Lithium Grease is a viscous, non-drip formula, ideal for metal-on-metal applications, and is suitable for high pressure, heavy loads. Additionally, WD-40 Specialist White Lithium Grease provides corrosion protection, and is durable and long-lasting.

When was WD-40 Multi-Use Product first made?

WD-40® Multi-Use-Product was first made in 1953.

Will WD-40 Multi-Use Product damage car paint?

WD-40® Multi-Use Product has been tested on many types of paint on various surfaces with no effect. Although WD-40 Multi-Use Product can be used on a variety of surfaces we recommend testing in an inconspicuous area before larger application. Wax polishes and certain wax coatings may be softened by WD-40 Multi-Use Product.

When should I use a Silicone Lubricant?

Use WD-40 Specialist® Silicone Lubricant when you need a lubricant that's clear, non-staining, and safe for most rubbers and plastics. This lubricant provides brilliant performance across a wide temperature range and offers excellent moisture resistance.

Where can I buy WD-40 Multi-Use Product?

WD-40® Multi-Use Product is available almost everywhere. It can be found in many countries in automotive, convenience, discount, drug, grocery, hardware, and home center stores. It's also available from leading distributors all over the world.

Will WD-40 Multi-Use Product damage paint?

WD-40® Multi-Use Product has been tested on many types of paint on various surfaces with no effect. Although WD-40 Multi-Use Product can be used on a variety of surfaces we recommend testing in an inconspicuous area before larger application. Wax polishes and certain wax coatings may be softened by WD-40 Multi-Use Product.

Why can't I empty all the product in my aerosol can?

Given that product "evacuation" issues, which occur when some product remains trapped inside a can and cannot be sprayed, are prevalent in the aerosol industry, they can impact the production of certain products. If you encounter difficulties with an aerosol can not spraying, we suggest following this concise troubleshooting guide: Shake the can vigorously. Turn the opening of the aerosol valve to the blue mark on the crown of the can. Hold the can vertically and not at an angle. If you're unable to get a result, contact us and we'll send you a replacement.

When using WD-40 Specialist Bike Degreaser on my bike chain, should I rinse with water afterwards?

With the WD-40 Specialist® Bike Degreaser it is really up to how dirty the components are. The formula itself is fast evaporating and leaves no visible residue. So if it's not too dirty then just spray liberally and use a cloth to collect the dirty liquid, there is no need to use water. If the chain is severely dirty and greasy then it is a very good idea to rinse with water to help ensure that all of the dirty liquid is removed. In some cases you may need to reapply the degreaser to remove all of the previous dirt and greasy grime. Always remember that the WD-40 Specialist Bike Degreaser leaves no residue and therefore is not a corrosion inhibitor. To protect the chain, relubricate with a chain lube or apply a corrosion inhibitor like WD-40® Multi-Use-Product for storage.

Will WD-40 Multi-Use Product remove rust?

WD-40® Multi-Use Product helps remove rust by breaking down the bonds between metal and rust. Spray the rusted surface with WD-40 Multi-Use Product, enough to thoroughly soak the area. Allow it sit for up to 10 minutes. Clean the rusted item with a wire brush. With the rust loosened, the brush should clean away most of the corrosion. Brush the surface until you’re satisfied you removed most of the rust and wipe any remaining residue. End by spraying with WD-40 Multi-Use Product to protect the surfaces from future rust.

Who invented WD-40 Multi-Use Product?

Norman Larsen and The Rocket Chemical Company

What was WD-40 Multi-Use Product originally made for?

WD-40® Multi-Use-Product was first used to protect the outer skin of the Atlas Missile from rust and corrosion.

What does WD-40 Multi-Use-Product contain?

Although the exact components of WD-40® Multi-Use Product are not disclosed, WD-40 Multi-Use Product does not contain silicone, kerosene, water, graphite, chlorofluorocarbons (CFCs), or indeed fish oil as is commonly misreported. By providing a list of substances that are not present in its formulation, WD-40 Company assures consumers that it prioritises safety, effectiveness, and environmental consciousness. This transparency allows individuals to make informed decisions when selecting a versatile and reliable product for various applications.

When should I use a degreaser?

Use a degreaser product to quickly remove grease, oil, dirt, tar and more.

Is WD-40 Multi-Use Product conductive?

No, WD-40® Multi-Use Product is non-conductive and has a dielectric strength of 38 000V per 2.5mm which basically means that you would require more than 38 000V per 2.5mm of space between two metal contacts for electrical breakdown/conductance to occur. However, we don't advise you to use our Multi-Use-Product on an energised circuit. Our aerosol can and flexible straw are metal (conduct electricity) and could brush up against a contact. We always recommend disconnecting power, spraying, allowing sufficient ventilation and then reconnecting power.

Is WD-40 Multi-Use Product a degreaser?

WD-40® Multi-Use Product is not a degreaser - it is a lubricant, water-displacer, and removes and prevents rust and corrosion.

What is WD-40 Multi-Use Product used for?

WD-40® Multi-Use Product has over 2000 uses covering a variety of subjects and industries including home, garden and automotive.

Is WD-40 Multi-Use Product good for bicycle chains?

WD-40® Multi-Use Product is safe to be used on your bicycle chain and is great for displacing water on your chain after washing/cleaning, although we recommend using WD-40 Specialist® BIKE for more targeted lubrication on your bicycle as these products are specifically designed for your bike.

What should I use to degrease bare metal prior to painting?

You can use the WD-40 Specialist® Degreaser on bar metal prior to painting as it leaves no visible residue. Just let the product properly dry before you paint the metal.

Is WD-40 Specialist Degreaser safe to use on matte painted alloys?

WD-40 Specialist® Degreaser is an industrial degreaser that is for use on bare metals only, and should not be used on painted or coated surfaces, plastic, or rubber.

What does WD-40 Multi-Use Product do?

WD-40® Multi-Use Product fulfils the following basic functions: 1. LUBRICATES: The product's lubricating ingredients are widely dispersed and tenaciously held to all moving parts. 2. PENETRATES: WD-40 Multi-Use Product loosens rust-to-metal bonds and frees stuck, seized, or rusted metal parts. 3. PROTECTS: The product protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements. 4. DISPLACES MOISTURE: Because it displaces moisture, WD-40 Multi-Use Product quickly dries out electrical systems to eliminate moisture-induced short circuits.

Is WD-40 Multi-Use Product a lubricant?

Yes. While the “W-D” in WD-40 stands for Water Displacement, WD-40® Multi-Use Product is a unique, special blend of lubricants. The product’s formulation also contains anti-corrosion agents and ingredients for penetration and water displacement.

What does 'WD-40' stand for?

WD-40' literally stands for Water Displacement, 40th formula. That's the name straight out of the lab book used by the chemist who developed the product back in 1953. The chemist, Norm Larsen, was attempting to concoct a formula to prevent corrosion—a task which is done by displacing water. Norm's persistence paid off when he perfected the formula on his 40th try.

Is WD-40 Multi-Use-Product safe to use on electrical voltages as a moisture repellent with circuits energised?

Our Multi-Use-Product is designed to displace moisture and has a dielectric strength of 38 000V per 2.5mm which basically means that you would require more than 38 000V per 2.5mm of space between two metal contacts for electrical breakdown/conductance to occur. However, we don't advise you to use our Multi-Use-Product on an energised circuit. Our aerosol can and flexible straw are metal (conduct electricity) and could brush up against a contact. We always recommend disconnecting power, spraying, allowing sufficient ventilation and then reconnecting power.

What is WD-40 Specialist Bike ?

WD-40 Specialist® Bike is a high-performance line of bicycle care products developed via collaboration between WD-40 Company scientists, professional bike mechanics and independent bicycle retailers. The WD-40 Specialist Bike line was designed for maintenance-minded cycling enthusiasts.

What is WD-40 Specialist?

WD-40 Specialist® is a line of specialized products designed to meet the unique needs of professionals and DIY enthusiasts. These products are formulated with advanced technology to provide enhanced performance in a variety of applications. Whether it's lubricating tools and machinery, protecting against rust and corrosion, or loosening stuck or frozen parts, WD-40 Specialist has a solution for every job. With a wide range of products including lubricants, degreasers, and penetrants, WD-40 Specialist is the go-to brand for those who expect nothing but the best.

What can I use on the moving parts, catches, locks on my doors and windows?

Using WD-40 Multi-Use Product as a penetrant to release stuck window hinges and to displace water after washing is a great use of our product. For light lubrication especially of locks and catches, you can use WD-40 Multi-Use Product, but for the more specialist user we suggest applying the following after MUP. For light hinges and rails use WD-40 Specialist Silicone (or Specialist Dry PTFE) as it is great at eliminating sticking and binding. Make sure to wipe up any over spray though as we don't want it getting onto any curtains. For heavier windows and ratchet systems use WD-40 Specialist White Lithium Grease The above two options (Silicone and WLG) would be more than sufficient for any window lubrication and corrosion protection. If you know that a particular window rail, hinge or ratchet will be subject to extreme conditions and are worried about corrosion and seizing then Specialist Spray Grease with the added WD-40 formula would be the one to use for corrosion protection but these situations are unlikely to occur. If you are spraying near a painted surface, be mindful that WD-40® Multi-Use Product may cause stains. We also advise you to contact the manufacturer of the door or windows to ensure using products on them doesn't affect your warranty! Just remember, you should make sure to clean out all the grime to give our greases a fair chance to work and wipe off any excess MUP before applying our greases. Small amounts of MUP left won't affect the performance of our greases. The important thing is to apply our greases to a clean surface with no grime or older grease.

What can I use to release stuck door hinges?

You can use WD-40® Multi-Use Product to release stuck door hinges. Our original product is great for lubrication and to keep moving parts moving! However, if you are spraying near a painted surface, be mindful that WD-40 Multi-Use Product may cause stains. We also advise you to contact the manufacturer of the door or windows to ensure using products on them doesn't effect your warranty!

What can I use to release stuck window hinges and runners?

You can use WD-40® Multi-Use Product to release stuck window hinges and runners. Our original product is great for lubrication and to keep moving parts moving! However, if you are spraying near a painted surface, be mindful that WD-40 Multi-Use Product may cause stains. We also advise you to contact the manufacturer of the door or windows to ensure using products on them doesn't effect your warranty!

When should I use a Penetrant?

Use WD-40 Specialist® Penetrant Spray to quickly loosen and remove seized, corroded, bound, and rusted nuts, bolts, clips, locks, etc.

When should I use a contact cleaner?

Use WD-40 Specialist® Contact Cleaner Spray when you need to clean the metal electrical contact points in sensitive electronics and electrical equipment, including larger electric motors, armatures, relays, electric panels, and generators. It is safe to use on most plastics, rubber and metal when used as directed - cleans oil, dirt, flux residue and condensation without leaving residue behind. When using, keep the following advice in mind: To prevent any accidental damage always check the manufacturer’s instructions before applying product to device. Do not spray into cavities, openings, gaps or areas of your device where this product does not have sufficient airflow to assist full evaporation. Shake can well and isolate all power, allowing hot surfaces to cool. Tilt surface while cleaning to allow any excess liquid to run off and ensure product is completely dry before restoring power.

How long does WD-40 Multi-Use Product last after application?

While this may vary depending on the application, WD-40® Multi-Use Product remains effective even after it appears to dry. The corrosion and rust protection ingredients remain adhered to the surface. External conditions may require additional applications of the product for maximum protection.

How is the WD-40 Specialist line of products different from the original WD-40 Multi-Use Product?

The WD-40 Specialist® product line is an extension of the WD-40 brand. WD-40 Company realizes that sometimes tough jobs require products designed for specific applications (i.e., high-performing specialty lubricants, penetrants, rust removers, etc.) and WD-40 Specialist is formulated for maximum performance to help workers get specific tasks done with ease.

How long is the shelf life of WD-40 Multi-Use Product?

WD-40® Multi-Use Product is a product of persistent nature which is designed and manufactured to a high degree of specifications. The product should continue to perform as expected for an almost indefinite period of time. However, actual performance is affected by the longevity of mechanical items such as the valve assembly on aerosol cans. As such, the shelf life is considered to be 5 years from the date of production; however, product will often dispense and perform as expected for considerably longer. WD-40 Multi-Use Product should be stored at the temperature recommended in the MSDS.

How was WD-40 Multi-Use Product invented?

It was invented when a small company call Rocket Chemical Company set out to create a line of rust prevention solvents and degreasers for use in the Aerospace industry.

Do your products stop wood or laminate floor squeaking?

Unfortunately, we do not have any products to fix this!

Can WD-40 Multi-Use Product be used to clean a toilet?

WD-40® Multi-Use Product is not a toilet cleaner and should never be used for this purpose.

Can you spray WD-40 Multi-Use Product on brake calipers?

WD-40® Multi-Use Product can be used to protect metal brake components while in storage and to assist in dismantling brake assemblies and seized callipers. WD-40 Multi-Use Product should not be sprayed on brakes or any components that require friction.

Can WD-40 Multi-Use Product be used on plastic?

WD-40® Multi-Use Product has been tested on various surfaces and materials with successful results. Although WD-40 Multi-Use Product can be used on a variety of surfaces we recommend testing in an inconspicuous area before larger application. The following plastics were immersed in WD-40 Multi-Use Product for 168 hours with no visible effects: • Polyethylene • Formica • Epoxy • Delrin • Polypropylene • Acrylic • VinylTeflon • Polyester • Nylon Clear polycarbonate and polystyrene may stress craze or crack in contact with the product. Please see the material compatibility section in our TDS for WD-40 Multi-Use Product which is available on our website.

Home » Hypergram Spin the Wheel Terms and Conditions

Hypergram Spin the Wheel Terms and Conditions

This document contains terms and conditions for one promotion.
WD-40 Spin to Win Hypergram – Terms and Conditions
19/11/2024 – 26/11/2024

This Promotion (this “Promotion”) is promoted by WD-40 Company Limited, a company registered in England with company number 01755958, registered office at 252 Upper Third Stret, Milton Keynes, MK9 1DZ, telephone number (01908) 555400, and VAT registration number 844274910 (the “Promoter”).
The terms and conditions below set out the terms on which you may participate in the Promotion (“Terms”). Entry into the Promotion shall constitute full and unreserved acceptance of these Terms. Failure to comply with these Terms will result in automatic cancellation of participation and the possible allocation of prizes.

Terms and conditions
1. This Promotion is open to residents of the United Kingdom (excluding Northern Ireland), aged 18 or over on the date on which you enter this Promotion, excluding employees of the Promoter and their immediate families and household members of the Promoter, its agents, and anyone else professionally connected with this Promotion.
2.No purchase is necessary to enter this Promotion. However, in order to enter this Promotion, you must have an Internet connection. Only one entry is permitted per person through the Promotion Period.
3. Each participant grants the Promoter and its designees the non-exclusive, irrevocable, perpetual, worldwide, royalty-free, transferable, sublicensable right and license to use, perform, exhibit, reproduce, edit and/or otherwise exploit entrant’s content (including text or other materials) submitted as part of their entry, in any manner and in any and all distribution channels, venues and/or media now known or hereafter devised, without further notice and/or any compensation of any kind to entrant. The participant further waives any “Moral Rights of Authors” and/or similar natural rights of ownership the entrant may have in entrant’s content. The participant further agrees, upon Promoter’s request and without compensation of any kind, to execute any additional documents so as to effect, record or perfect the grant of rights granted to Promoter herein.
4. By participating in the Promotion and without additional consideration and/or consent or prior review and in exchange for the potential to win the prizes referenced herein, each entrant (except where prohibited by law) consents to the use by Promoter and its designees of his/her first name, last name, email address and any other personally identifiable information contained in the participants content for the Promotion and/or any advertising and marketing purposes in any media throughout the world , unless the participant notifies the Promoter that they do not wish us to make these details available..
5. Entry Requirements: Entries must comply with all of the following requirements as determined by the Promoter in its sole discretion:
a) scan the QR code at either Kings Cross Station or Westfield London during the Promotion Period;
b) the QR code will direct you to the digital form on Promoters website where you will have to enter your details in the required fields (full name, email address and occupation); and
c) spin to win.
6. By entering this Promotion, you confirm that your entry will:
a) not be inappropriate, objectionable and/or unfit for publication (e.g., be and/or include pornographic images, nudity, obscenity, violence and/or hate speech;
b) not disparage Promoter, its products and/or otherwise adversely affect the goodwill and business reputation of Promoter;
c) not advocate alcohol use, drug use, violent behaviour and/or any illegal activity;
d) not display and/or promote products competitive to the Promotor; and
e) must be relevant to the Promotion theme.
7. Winning a prize is contingent upon entrant fulfilling all the requirements of and all Terms provided herein. Failure to comply with these Terms may result in disqualification from this Promotion.
8. Winners. There will be ten (10) winners who will be selected at random by a random third-party software from all eligible entries.
9. Prizes. There are a total of ten (10) £25 gift cards available to be won. The total retail value of the prizes amounts to £250.
10. Entry to this Promotion opens at 12:01am (UK time) on 19/11/2024 and closes at 11:59pm (UK time) on 26/11/2024 (the “Promotion Period”). Entries received after the end of the Promotion Period (for whatever reason) will be invalid.
11. No entries from agents, third parties, syndicated entries or those made using methods such as a computer macro, script or the use of automated devices are permitted and no bulk entries.
12. The Promoter reserves the right at any time, in its absolute discretion, to: (a) verify the eligibility of any participant (including their age and place of residence); (b) disqualify any participant found to be abusing or tampering with the operation of this Promotion or entering using fraudulent means, or who the Promoter believes to have acted in breach of these terms and conditions; and (c) disqualify participants who do not give correct contact details or those who make an entry on someone else’s behalf.
13. As soon as the prize winners claim has been verified, The Promoter’s Customer Service Team will commence the prize fulfilment process. The prize winners will be contacted directly via the email address, through which they entered the Promotion, to arrange prize fulfilment. The prize will be delivered within 30 working days from a valid fulfilment of the prize
14. All costs and expense not included with the prize are the responsibility of the respective winners. The Promoter will not be liable if a prize winner cannot take the prize for reasons beyond the Promoter’s control or if the Promoter is unable to contact that prize winner, including due to his or her provision of inaccurate or incomplete information. If: (a) a prize winner cannot be contacted or does not respond within 28 days of first being notified of their win, (b) the winner is ineligible, (c) the winner’s entry is invalid or disqualified, or (d) the winner has otherwise failed to comply with these terms and conditions, then such potential winner forfeits all rights to any prize. In such an instance, the Promoter reserves the right to choose and notify a new winner. The Promoter will attempt to contact the winner via email up to two times
15. No cash or other alternatives are available to the prize. The prize is non-transferable and non-exchangeable and cannot be resold. The Promoter reserves the right to substitute the prize with an alternative prize of equal or greater value if circumstances beyond the Promoters control make it necessary to do so. Unless otherwise agreed in writing by the Promoter, the prize will only be awarded to the winner. The confirmed prize winner will be announced publicly via social media pages, once the winner has been made aware first.
16. The Promoter must either publish or make available information that indicates that a valid award took place. To comply with this obligation the Promoter will send the surname and county of major prize winner and, if applicable copies of their winning entry, to anyone who emails privacy@wd40.co.uk. If you object to any or all of your name, county and winning entry being published or made available, please contact the Promoter at privacy@wd40.co.uk (within one month of the end of the Promotion Period). In such circumstances, the Promoter must still provide the information and winning entry to the Advertising Standards Authority on request. The winner will be required to take part in publicity relating to this Promotion and the Promoter reserves the right to use the winner’s name and image for such purposes. Except as otherwise required by applicable law, the Promoter will not be responsible under any circumstances or be liable for any entry or claim which for technical or other reason is unsuccessful, incomplete, lost, late, damage, corrupted or misdirected.
17. Participants are responsible for all Internet connection costs charged by your Internet service provider.
18. If the Promoter fails to comply with these terms and conditions, the Promoter is responsible for loss or damage a participant suffer that is a foreseeable result of the Promoter’s breach of these terms and conditions or its negligence, but it is not responsible for any loss or damage that is not foreseeable. Loss or damage is foreseeable if they were an obvious consequence of the Promoter’s breach or if they were contemplated by a participant and the Promoter at the time that you entered this Promotion. The Promoter makes no express or implied warranties with respect to the prizes.
a) The Promoters liability is strictly limited to delivery of the prize actually and validly won.
b) The Promoter cannot be held liable under any circumstances in the event of a delivery problem or loss of postal mail.

19. If any court or competent authority finds that any provision of these Terms (or part of any provision) is invalid, illegal or unenforceable, that provision or part-provision shall, to the extent required, be deemed to be deleted, and the validity and enforceability of the other provisions of these terms and conditions shall not be affected.
20. The Promoter shall not be liable for: (i) any failure to comply with these terms and conditions as a consequence of events beyond its reasonable control including without limitation, any failure of communication networks; and/or (ii) any loss of profits, loss of revenue or other economic loss or any indirect or consequential loss.
21. The Promoter reserves the right to extend, withdraw, alter or suspend this Promotion or these terms and conditions at any time if circumstances beyond its control make this unavoidable. Any entrant who sought to participate in this Promotion under its original terms will not be disadvantaged by any such change under this clause. Any decision of the Promoter in respect of this Promotion is final.
22. By submitting your personal information, you agree to receive emails from the Promoter containing news and offers that we think are of interest to you. You may unsubscribe at any time.
23. All personal data submitted in connection with the Promotion will be processed by the Promoter for the purposes of administering and managing the Promotion and the award of prizes (where applicable) and verifying the eligibility of a participant. It may be communicated to service providers and subcontractors for the execution of the work carried out on its behalf as part of this Promotion.
a) Information collected from participants is subject to the Promoters Privacy policy, a copy of which can be found at Privacy Policy, which tells you how the Promoter uses any personal information it may collect about you by entering this Promotion.
b) By entering this Promotion, and without compensation and/or additional consent or prior review and. in exchange for the opportunity to win the prizes mentioned herein, each participant (except where prohibited by law) consents to the use by the Promoter and its representative of his/her first name, last name, username, email address and any other personal information required.
c) Your data is stored in a secure environment and stored in accordance with the applicable UK and European laws and regulations. You therefore have the right to access, rectify and delete your personal data, the right to limit processing, the right to the portability of your data and the right to object to the processing of your data. You can exercise all of these rights by writing to: privacy@wd40.com.
24. These terms and conditions (including any contractual or non-contractual dispute or claim in relation to them) are governed by the laws of England and Wales. You can bring legal proceedings in respect of this Promotion and these terms and conditions in the English courts. If you live in Scotland, you can bring legal proceedings in respect of this Promotion and these terms and conditions in either the Scottish or the English courts.

Products

Product Information

About WD-40

How tos

Hypergram Spin the Wheel Terms and Conditions

Tried our WD-40
Specialist Range
Yet?

Contact Us

Hypergram Spin the Wheel Terms and Conditions

Tried our WD-40 Specialist Range Yet?

Tried our WD-40
Specialist Range
Yet?